iv Preface
• Use only distilled water or coupling gel on the scanning surface. Do not use mineral oil,
baby oil, or lanolin-based gels.
• Do not operate the phantom if visual inspection identifies physical damage. Physical
damage to the case may cause premature desiccation.
Regulatory Information
For a definition of the symbols used throughout this document and additional information related to
user and device safety, see Appendix D: Regulatory Supplement on page 39. Review this
information thoroughly before setting up and using the equipment.
Finding Additional Information
For more information about the Doppler 403 Flow Phantom, refer to the Gammex website —
www.gammex.com. Visit the website for the latest product information and product updates.
Document Conventions
Bold typeface indicates a button name or something that the user must type.
Italicized typeface indicates the title of a manual, a cross-referenced subsection in this manual, or
introduces a new term or phrase.
WARNING: Do not use in the presence of flammable anesthetics.
WARNING: Do not use in a sterile or corrosive environment.
WARNING: Freezing temperatures will damage the phantom. Store the
phantom at room temperature or within the 35° to 105° F (2° to 40° C)
storage range.
WARNING: Do not press the transducer into the scanning surface.
CAUTION: Routine preventive maintenance and safety testing are
recommended yearly.
CAUTION: Do not remove or otherwise damage the scanning surface material.
The Doppler 403 Flow Phantom must be used in accordance with the instructions in
this manual. Read all instructions and safety labels before use.
To Next Page
Loading...