Need help?Do you have a question about the G&D DP-HR-U and is the answer not in the manual?
Ensures the device is disconnected from all power sources before installation.
Advises against opening the device or removing covers to avoid electric shock.
Ensures mains plugs remain accessible at all times during installation.
Ensures ventilation openings are not covered for proper device operation.
Warns against inserting objects through device openings due to dangerous voltage.
Prohibits mechanical or electrical alternations to the device; voids warranty.
States only G&D service technicians may remove the device cover.
Prohibits using non-certified fiber optic modules for safety and compliance.
Enables/disables Generic HID mode on the user module for USB input devices.
Explains using USB input devices and enabling Generic HID mode on target modules.
Explains how to open the user module's OSD in extender mode using hotkeys.
General| Category | Control Unit |
|---|---|
| Manufacturer | G&D |
| Product Name | DP-HR-U |
| Storage Temperature | -20°C to 60°C |
| Weight | 200g |
| Interface | USB |
| Operating Temperature | 0°C to 40°C |
To Next Page
