To Next Page

To Previous Page

6.1.3.2. For iOS Devices

6.1.3.2.1. Preliminary preparations

1. A printer that has wireless network function.

2. iOS mobile device.

6.1.3.2.2. Operation steps

1. Turn on printer power.

2. For an iOS mobile device, tap the “G&G” icon on the main screen to enter the first interface of

“G&G”.

3. Select the connection method according to your habit to connect the printer.

4. Select the function you need and set it up to meet your function needs.

Note:

• If printing fails, please inspect if the iOS device is connected to the wireless network

where the printer is connected to.

• If the iOS mobile device did not detect any printer, check whether the printer is

powered on and the printer is turned on.

• For more details, please refer to the mobile print user guide attached.

6.2. Mopria mobile print

Mopria mobile print is currently not supported.

6.3. AirPrint mobile print

AirPrint mobile print is currently not supported.

Questions and Answers:

Need help?

Do you have a question about the G&G P2022 Series and is the answer not in the manual?

G&G P2022 Series Specifications

General