4
Technical Specifications - Hydromette UNI 1
(1)
MS Connection Socket
for connection of temperature probes PT 100,
all active electrodes and infrared sensor IR 40
(2)
LCD Readout
for all measurements
(3)
Selector Switch
»position M«
for measurements using the following active electrodes:
MH 34 for moisture measurements on coniferous
wood in the range between 40 and 200 % m.c.
MB 35 for non-destructive moisture measurements of
concrete surfaces
B 50 for non-destructive moisture measurements of set
inorganic construction materials (concrete, cement floor-
ing, etc.)
RF-T 28 for air humidity measurements,
RF-T 31 for air humidity measurements,
RF-T 32 for air humidity measurements,
IR 40 for surface temperature measurements with infrared
sensor,
»position 200°«
for temperature measurements up to 200 °C with elec -
trodes RF-T 28, RF-T 31, RF-T 32 and temperature pro-
bes PT 100,
To Next Page
Loading...
