GANN HYDROMETTE UNI 1 User Manual

6
Measuring ranges
Wood Moisture, position »M«: 40 - 200 % m.c. on coniferous wood using active
electrode MH 34
Structural Moisture, position »M«: 0 - 199 digits non-destructive measurement
with active electrode B 50/B60
0,3 - 8,5 % of dry weight with active electrode
B 50 and conversion table
1 - 8 % of dry weight with active electrode
MB 35 on non-destructive surface
measurement of concrete
Air Humidity, position »M«: 7 - 98 % R.H. with live electrodes RF-T 28,
RF-T 31, RF-T 32 and RF-T 36
Temperature 1, position »200°«:
-200 - +200 °C with temperature probes PT 100
Temperature 2, position »600°«: -200 - +600 °C with temperature probes PT 100
Temperature 3, position »M«: -20,0 - +200 °Cwith infrared sensor IR 40.
If the measured value exceeds the measuring capacity, the figure »1« appears on the left side of
the display screen (2).
Dimensions
Plastic casing: Length 140 mm x Width 90 mm x Height 42/50 mm.
Weight: about 220 g without accessory.

GANN HYDROMETTE UNI 1 Specifications

General

Brand	GANN
Model	HYDROMETTE UNI 1
Category	Measuring Instruments
Language	English