GANN HYDROMETTE UNI 1 User Manual

GANN HYDROMETTE UNI 1 + UNI 2
Operating instructions

GANN HYDROMETTE UNI 1 Specifications

General

Brand	GANN
Model	HYDROMETTE UNI 1
Category	Measuring Instruments
Language	English

Summary

GANN HYDROMETTE UNI 1 & UNI 2 Introduction

Device Overview

Introduction to the GANN HYDROMETTE UNI 1 and UNI 2 devices.

Technical Specifications and Operation

UNI 1 Specifications and Operation

Details UNI 1 components, controls, operation, battery check, and calibration.

UNI 2 Specifications and Operation

Details UNI 2 components, controls, operation, battery check, and calibration.

Measuring Electrodes, Accessories, and Probes

Moisture Measurement Electrodes

Covers electrodes for wood, building materials, and surface moisture.

Air Humidity and Temperature Sensors

Details RF-T series electrodes and Pt 100 temperature probes.

Infrared Temperature Sensor IR 40

Information on the IR 40 infrared surface temperature sensor.

Measurement Procedures and Reference Data

Moisture Measurement Guidelines

Instructions for using various moisture measurement electrodes.

Temperature Measurement Guidelines

Procedures for taking temperature measurements with different probes.

Moisture Measurement Data and Tables

Provides conversion tables and graphs for moisture readings.

Safety, Calibration, and Support Information

General Safety and Handling Precautions

Essential safety guidelines, warnings, and general remarks for device usage.

Calibration and Testing Procedures

Guides for testing, recalibrating, and special calibration of humidity sensors.

Warranty and Compliance Information

Details warranty terms, EC Declaration of Conformity, and manufacturer.