8
Technical Specifications - Hydromette UNI 2
(1) BNC Connection Socket for connection of electrodes designed for testing set build-
ing materials according to the resistance method
(2) MS Connection Socket for connection of temperature probes PT 100, all active
electrodes and infrared sensor IR 40
(3) LCD Readout for all measurements
(4) Selector Switch »position B«
for measurement of set building materials according to the
resistance measuring method
»position M«
for measurements using the following active electrodes:
MH 34 for moisture measurements on coniferous wood in
the range between 40 and 200 % m.c.
MB 35 for non-destructive moisture measurements of
concrete surfaces
B 50/B 60 for non-destructive moisture measurements of
set inorganic construction materials (concrete, cement
flooring, etc.)
»position M«
RF-T 28 for air humidity measurements,
RF-T 31 for air humidity measurements,
To Next Page
Loading...
