GANSHORN PowerCube-Ergo - Safety Definitions and Symbols

To Next Page

To Previous Page

GANSHORN Medizin Electronic GmbH Service Manual Ref.No. 03 140 0 046

PowerCube-Ergo-CASE_ENG_rev.02, 23.11.2012 Preface, page 7 of 8

Requirements for Maintenance and Service Personnel

 Installation, initial operation, all changes, modifications, expansions, repairs, maintenance

measures including safety control and metrological/safety control, and any other work on

GANSHORN products may only be performed by GANSHORN or by an authorized GANSHORN

partner.

 The enclosures of GANSHORN devices may only be opened by GANSHORN or by an

authorized GANSHORN partner.

 If this device is modified appropriate inspection and testing must be conducted to ensure

continued safe use of the device. After each maintenance control or other operation with the

device or the system a metrological control and safety control is necessary. Each metrological

control demands a succeeding safety control.

Definitions

Danger

Indicates an imminent hazard which, if not avoided, will result in death or serious injury

Warning

Indicates a potential hazard or unsafe practice which, if not avoided, could result in death or serious

injury

Caution

Indicates a potential hazard or unsafe practice which, if not avoided, may result in minor personal injury

or product/property damage

Example:

Level of seriousness Kind of hazard

Text………………………………………….

For application instructions and other useful information

INFORMATION

Text…………………………………………..

Action Instructions / Operating Steps

► Explanation …………………………………………..

= Consequence / effect…………………………………………..

Lists

 Text…………………………………………..

Cross Reference

Cross references are written as follows:

=> Chap. 1, Safety Regulations