Gantner GAT Access 6100 F User Manual

Function description
The GAT Access 6100 F reads contact-free data carriers and checks
and grants authorisations. The user holds the data carrier over the round
scan field and selects the required service via the acknowledge key. The
integrated 4-segment LED display, monochrome LCD display and acoustic
signal indicate authorisation.
Via the fingerprint reader GAT FR 055 the identification of the visitors
is verified by comparing their fingerprints with the fingerprint templates
(two templates per visitor) stored on the visitor‘s personal data carriers.
The combination of RFID data carriers and fingerprints allows for optimal
protection against misuse of data carriers.
For capturing the fingerprints and storing them to the data carriers the GAT
Access 6100 F Enrollment Station is used.
Highlights
•
Activation of turnstiles, doors etc. via relay output
•
Feedback input
•
User guidance via monochrome display (LCD), 4-segment LED display,
illuminated round scan field and beeper
•
Secure data transmission between reader and data carrier
•
Read/write frequency 13.56 MHz
•
Reading MIFARE
TM
Standard data carriers
•
Expandabilities for verification via fingerprint
•
Opening of housing only possible with special tool
•
Plug & Play installation
GAT Access 6100 F
Access Control Terminal with Biometry
Application
The GAT Access 6100 F with fingerprint reader GAT FR 055 is a stylish
terminal for access control in leisure facilities such as swimming pools,
spas and gyms. Identification at the terminal is by contact-free RFID data
carrier (Radio Frequency Identification).
With the fingerprint reader GAT FR 055 access control is extended by
verification with biometric data, which enables optimal protection against
misuse of personal data carriers.
Information for user guidance is displayed via a graphical monochrome
display (LCD).
Description PartNo.
GAT Access 6100 F
Terminal for entry control with integrated, contactless
MIFARE
TM
reader, with black-white display (LCD)
776487
GAT FR 055
Fingerprint reader for GAT Access 6100 F, wall mounting
557433
GAT FR 055 Weather Cover
Weather protection cover for GAT FR 055 and
GAT FR 055 FIU 3k
174529
1
www.gantner.com
Order information
Description PartNo.
GAT Access 6100 F Enrollment Station
Table station for capturing fingerprints
174327
GAT Reader WK
Tool to open the reader housing
581683
Accessories
Valid as from July 31
th
2013 • Technical data subject to modifications without notice!
DB_GAT-ACCESS6100F--BIO-EN_11.indd • PartNo.: 243526
GAT Access 6100 F
Fingerprint reader
GAT FR 055

Gantner GAT Access 6100 F Specifications

General

Outputs	4
Number of Readers Supported	4
Power Supply	12-24 VDC
Housing	Metal
Weight	0.8 kg
Communication	RS-485
Reader Ports	4
Inputs	8

Summary

Application Overview

Function Description and Highlights

Order Information

GAT Access 6100 F Terminal

Terminal for entry control with integrated contactless MIFARE reader, black-white display.

GAT FR 055 Fingerprint Reader

Fingerprint reader for GAT Access 6100 F, suitable for wall mounting.

GAT FR 055 Weather Cover

Weather protection cover for GAT FR 055 and GAT FR 055 FIU 3k.

Accessories

GAT Access 6100 F Enrollment Station

Table station designed for capturing fingerprints.

GAT Reader WK

Special tool provided for opening the reader housing.

Technical Data Specifications

Power and Voltage Requirements

Details nominal voltage, permitted input voltage, and average power consumption.

Data Storage and Clock

Information on internal EEPROM memory, data preservation, and internal clock.

Reader and Sensor Details

Specifies reader type, frequency, and GAT FR 055 sensor characteristics.

Display Elements

Describes the graphical LCD, LED display, and acoustic signal.

Control and Interface Specifications

Details control elements, host interface, signal inputs/outputs, and connection terminals.

Housing, Environment, and Certifications

Covers housing material, ambient temperature, humidity, protection types, weight, and certifications.

Dimensions and Typical Application

Mounting and Installation Instructions

Mounting Hole Preparation

Instructions for drilling mounting holes on a flat background.

Connection Cable Routing

Guidance on routing power supply and network cables via back box or cable duct.

Wall Mounting Recommendations

Advice on fixing to uneven backgrounds and recommended mounting height.

Electrical Connection Details

Describes connecting cables at the device back part.

Mounting the Upper Device Part

Steps for fixing and attaching the upper part of the GAT Access 6100 F.

Opening the Upper Part

Instructions on how to open the device upper part using a special tool.

Maintenance

Electrical Connections and Usage

TCP/IP Connection with External Power

Diagram and notes for TCP/IP connection with external power supply.

Power Supply and Network

Details on DC power supply and Ethernet network connection.

Recommended Ethernet Cables

Specifications for recommended Ethernet cables and wire colours.

Device Upper Part Connection

Attention points for connecting the cable between the device back and upper parts.

Relay Output Functionality

Explains the relay output for activating devices like turnstiles.

Optocoupler Input Usage

Information on using the optocoupler input for status acquisition.

Fingerprint Reader Usage Guide

Instructions on correct finger placement for optimal scanning.

General Safety Instructions

Important safety guidelines for installation and operation.