Gantner GAT ACCESS 6100 User Manual

Function description
The GAT Access 6100 reads contact-free data carriers and checks and
grants authorisations. The user holds the data carrier over the round
scan field and selects the required service via the acknowledge key. The
integrated 4-segment LED display, monochrome LCD display and acoustic
signal indicate authorisation.
Further functions:
•
Activation of turnstiles, doors etc. via relay output
•
Feedback input
•
User guidance via monochrome display (LCD), 4-segment LED display,
illuminated round scan field and beeper
•
Secure data transmission between reader and data carrier
•
RFID frequency 13.56 MHz
•
Reading of LEGIC
®
, MIFARE
TM
standard and ISO 15693 data carriers
(depending on the device type)
•
Opening of housing only possible with special tool
•
Plug & Play installation
GAT Access 6100
Access Control Terminal
Application
The GAT Access 6100 is a stylish terminal for access control in leisure
facilities such as swimming pools, spas and gyms. Identification at
the terminal is by contact-free RFID data carrier (Radio Frequency
Identification).
Information display for user guidance is realised via a graphical mono-
chrome display (LCD). The different versions (see order information) give
technological flexibility.
Description PartNo.
GAT Access 6100 B
Access control terminal with monochrome display (LCD)
and contact-free reader for LEGIC
®
data carriers
651681
GAT Access 6100 F
Access control terminal with monochrome display (LCD)
and contact-free reader for MIFARE
TM
data carriers
776487
GAT Access 6100 ISO
Access control terminal with monochrome display (LCD)
and contact-free reader for ISO 15693 data carriers
651782
1
www.gantner.com
Order information
Description PartNo.
GAT Access 6100 Manual
Operating and configuration instructions, English
332727
GAT Reader WK
Tool to open the reader housing
581683
Accessories
Valid as from July 30
th
, 2013 • Technical data subject to modifications without notice!
DB_GAT-ACCESS6100--EN_11.indd • PartNo.: 860279

Gantner GAT ACCESS 6100 Specifications

General

Product Type	IP Access Controller
Power Supply	12-24 VDC
Operating Voltage	12-24 VDC
Number of Doors	1
Number of Readers Supported	2
Inputs/Outputs	4 inputs, 2 outputs
Housing	Plastic
Communication Protocols	RS-485
Card Formats Supported	DESFire

Summary

GAT Access 6100 Product Overview

Application

Describes the GAT Access 6100 terminal for access control in leisure facilities.

Function Description

Details how the GAT Access 6100 reads data carriers, grants authorization, and provides feedback.

Order Information

Lists available versions of the GAT Access 6100 terminal and their part numbers.

Accessories

Lists related accessories for the GAT Access 6100, including manuals and tools.

Technical Specifications and Dimensions

Technical Data

Provides detailed technical specifications for the GAT Access 6100 device.

Dimensions

Specifies the physical dimensions of the GAT Access 6100 terminal.

Typical Application Diagram

Illustrates a typical installation scenario for the GAT Access 6100.

Mounting and Installation

Wall Mounting

Instructions for mounting the device on a wall, including cable considerations.

Device Upper Part Mounting

Steps for connecting and securing the device upper part to the back part.

Installation Notes and Security

Important notes on checking connections, cleaning, and device security.

Electrical Connections and Safety

Network and Power Supply

Details on Ethernet network connection and DC power supply.

Signal Inputs and Outputs

Explanation of relay output and optocoupler input functions.

Safety Instructions

Critical safety warnings and precautions for installation and operation.