Gantner GAT ECO.Side Lock 7000 - User Manual

Functional description
Lockers can be electronically locked and unlocked by the GAT ECO.Side Lock
7000. The user simply presses the locker door shut and holds their data
carrier next to the RFID reading center on the locker door. The lock reads
the data on the data carrier and verifies the information. Following valid
authorization, the locker door is then locked or unlocked accordingly by
the GAT ECO.Side Lock 7000.
Locking and unlocking actions are signaled by an integrated beeper and
a bi-colored LED.
The GAT ECO.Side Lock 7000 can be configured via USB, and also on-
site using the programming data carrier, to operate in different modes.
Highlights
•
Maintenance-free “Low-Power Technology” provides a useful life of
approximately 10 years without battery replacement
•
Free and personal locker mode selection
•
Rental locker function
•
Selectable operation mode
•
Similar hardware to the GAT NET.Lock 7000 locks allows easy
exchange between both lock types
•
Suitable for left and right hinged doors and a variety of locker material
•
Internal memory records the last 150 locker actions
•
Reliable data transmission between RFID reader and data carrier
•
Motor driven locking/unlocking guarantees exceptional reliability
•
Locking status indicated via LED and beeper
•
Configuration via a PC/laptop (USB connection)
•
Vandal-proof installation
•
Integrated break-in alarm
GAT ECO.Side Lock 7000
Battery Powered MIFARE
®
and ISO 15693 Lock
Application
The GAT ECO.Side Lock 7000 is the ideal solution for the convenient
electronic locking of wardrobe lockers in fitness clubs, attraction parks,
golf resorts and individual business applications such as filing cabinets and
safe deposit boxes. Identification of system users by the lock is performed
using contactless RFID data carriers (Radio Frequency Identification).
Different types of data carrier media such as chip cards, chip bands and
key tags are available.
The GAT ECO.Side Lock 7000 is suitable for any kind of locker material
(wood, HPL, glass, steel sheet and fully synthetic materials) and can be
used with both left and right handed opening doors. The various operating
modes provide flexibility and allow the locks to be configured to suit
specific system requirements.
Due to the mechanical compatibility with the GAT NET.Lock 7000 series a
quick and simple installation of existing locker rooms using the GAT ECO.
Side Lock 7000 is possible.
Description Part No.
GAT ECO.Side Lock 7000
Battery operated locker lock for MIFARE
®
and ISO 15693
data carriers, without batteries, without bolt set, without
door label
631325
1
www.gantner.com
Order information
Description Part No.
Manual GAT ECO.Side Lock 7000
Operating and installation instructions in English
932329
GAT NET.Lock BoltSet 7100
Door shackle carrier and booster for non-metallic doors
369535
GAT NET.Lock BoltSet 7200
Door shackle carrier and booster for metallic doors
532123
GAT NET.Lock BoltSet 7300
Door shackle carrier and booster for glass doors (adhesive
not included)
774232
Batterie 3,6V Lithium LS14500
Battery for GAT ECO.Side Lock 7000
912012
GAT ECO.Side Lock Basic Set F/ISO
Package with configuration software, USB cable for PC
connection, 3 master data carriers, 4 system data carriers
812528
GAT Key Tag 7309, S50 MASTER
Master data carrier for the GAT ECO.Side Lock 7000
816229
GAT NET.Lock Label GEA right
GAT NET.Lock Label GEA NUM right
Self-adhesive door label in GANTNER design, for right-
hinged doors, with or without locker number
679034
679236
GAT NET.Lock Label GEA left
GAT NET.Lock Label GEA NUM left
Self-adhesive door label in GANTNER design, for left-
hinged doors, with or without locker number
370022
679135
Accessories
Valid from June 10th, 2015 • Technical data subject to modification without notice!
DB_GAT-ECOSide-Lock7000--EN_11.indd • Part No. 642832
GAT ECO.Side Lock 7000
GAT NET.Lock BoltSet 7100

Summary

GAT ECO.Side Lock 7000 Product Information

Application Areas

Describes the ideal use cases for the GAT ECO.Side Lock 7000 in various environments.

Core Functionality

Explains how the lock electronically locks and unlocks using data carriers.

Key Features

Lists the main advantages and highlights of the GAT ECO.Side Lock 7000, including battery life.

Ordering and Accessories

Details the main product part number and available accessories for the lock.

Technical Data and Specifications

Technical Data Summary

Provides detailed technical data including power, dimensions, and environmental ratings.

Product Dimensions and Diagrams

Illustrates the physical dimensions and component diagrams of the lock.

Installation Guide

General Installation Requirements

Covers door thickness, alignment, and general preparation steps for installation.

Mounting on Non-Metallic Doors

Step-by-step instructions for installing the lock on non-metallic locker doors.

Mounting on Metallic Doors

Detailed instructions for mounting on metallic locker doors, including necessary cut-outs.

Mounting on Glass Doors

Specific guidelines for installing the GAT ECO.Side Lock 7000 on glass locker doors.

Setup and Configuration

Battery Installation

Instructions for inserting and replacing the unit's batteries.

Software Configuration

Steps for configuring the lock using a PC/laptop and the provided software.

Safety and Environmental Notes

Important safety instructions and WEEE disposal information for the product.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The GAT ECO.Side Lock 7000 is a battery-powered electronic locker lock designed for various applications, including fitness clubs, attraction parks, golf resorts, and business uses like filing cabinets and safe deposit boxes. It supports contactless RFID data carriers (chip cards, chip bands, and key tags) for user identification.

Function Description

The GAT ECO.Side Lock 7000 allows for electronic locking and unlocking of lockers. Users simply press the locker door shut and then hold their RFID data carrier near the reading center on the locker door. The lock reads and verifies the data carrier's information. Upon valid authorization, the locker door is either locked or unlocked. All locking and unlocking actions are signaled by an integrated beeper and a bi-colored LED. The lock can be configured via a USB connection to a PC/laptop or on-site using a programming data carrier, allowing it to operate in different modes to suit specific system requirements. Its mechanical compatibility with the GAT NET.Lock 7000 series ensures quick and simple installation in existing locker rooms.

The lock features a door status contact that activates or deactivates when the locker door is closed or opened, determining the door's state. It is crucial to keep this contact clean and undamaged for correct functionality.

Important Technical Specifications

• Power Supply: 2 x 3.6 V Lithium battery, type AA, SAFT - LS14500.
• Battery Life-time: Up to 10 years at +20 °C (68 °F) due to "Low-Power Technology."
• Data Storage: EEPROM for 150 bookings, with data preservation during battery change.
• Internal Clock: Quartz-controlled real-time clock.
• Reader Type: MIFARE® (Classic 1k and 4k, Ultralight®, DESFire EV1®) and ISO 15693 supported.
• Frequency of Reading Field: 13.56 MHz.
• Range of Reading Field: Approx. 5 to 35 mm (0.2" to 1.38"), depending on installation and data carrier.
• Break-open Resistance Capability: DIN 4547-2 class C.
• Display Element: LED (red/green).
• Configuration Interface: USB 2.0, Micro-B.
• Housing Material: Plastic (PC), halogen-free, V0.
• Housing Color: Dark gray.
• Dimensions: 125.2 mm x 100 mm x 25 mm (4.93" x 3.94" x 0.98").
• Permitted Ambient Temperature: 0 to +60 °C (32 °F to 140 °F).
• Protection Type: IP 52.
• Protection Class: III.
• Weight: Approx. 400 g (14.1 oz).
• Environment Class (based on VdS 2110): II (conditions in indoor areas).

Usage Features

• Versatile Material Compatibility: Suitable for various locker materials including wood, HPL, glass, steel sheet, and fully synthetic materials.
• Door Handing: Can be used with both left and right-handed opening doors.
• Operation Modes: Offers selectable operation modes, including free and personal locker mode selection, and a rental locker function, providing flexibility to suit specific system requirements.
• Reliable Data Transmission: Ensures reliable data transmission between the RFID reader and data carrier.
• Motor-Driven Locking/Unlocking: Guarantees exceptional reliability for locking and unlocking actions.
• Status Indication: Locking status is clearly indicated via an LED and beeper.
• Vandal-Proof Installation: Designed for secure and robust installation.
• Integrated Break-in Alarm: Enhances security by alerting to unauthorized access attempts.
• Easy Configuration: Configuration can be done conveniently via a PC/laptop using a USB connection and GAT Config Manager software, or on-site with a programming data carrier.
• Internal Memory: Records the last 150 locker actions, providing an audit trail.
• Door Width Requirement: Minimum allowed door width (measured from the door shackle to the hinge) is 230 mm (9.05").
• Label Customization: A self-adhesive door label in GANTNER standard design or a custom design can be attached to the locker front. If a custom label is used, it must include a transparent field for the LED light.

Maintenance Features

• Maintenance-Free "Low-Power Technology": Provides an extended battery life of approximately 10 years without the need for frequent battery replacement.
• Battery Replacement: Batteries are easily accessible by removing the red battery cover on the underside of the housing. It is recommended to insert batteries directly before mounting the lock to avoid unnecessary battery usage. Only approved SAFT - LS14500 batteries should be used.
• Data Preservation: EEPROM ensures data preservation even during battery changes.
• Installation Requirements: For non-metallic doors, a drill hole for the status LED is required. For metallic doors, a cut-out in the locker door is needed for the bolt set and label carrier. For glass doors, a metal support is attached using adhesive. Proper alignment of the bolt set and the lock front is crucial for optimal functionality, ensuring no gap when the door is pressed shut.
• Adhesive Recommendations for Glass Doors: Specific adhesives like Conloc UV 680 (for transparent glass) and Conloc UV 683 with Aktivator 953 (for non-transparent glass) are recommended and have been successfully tested by GANTNER Electronic GmbH.
• WEEE Compliance: GANTNER products are marked with the WEEE symbol, indicating that they should not be disposed of with normal household waste but through designated electronic waste recycling facilities. This supports natural resource conservation and environmental protection.

Gantner GAT ECO.Side Lock 7000 Specifications