18
GB
Installing the Irrigation Valve
without a Valve Box:
7 7
8 8
3
3. Install the valve box with the top edge of the box at ground
level.
This avoids damage when mowing the lawn.
Please refer to the relevant operating instructions for information
on how to install the Irrigation Valves in GARDENA Valve Boxes
V1 and V3.
The integrated solenoid valve works only correctly with the
Irrigation Valve connected in flow direction.
Flow direction
A V Pay attention to the flow direction (arrows) when
installing the Irrigation Valve
3
.
v Seal the screw connections with PTFE sealing tape, Art. 7219.
Connecting GARDENA Connecting pipes
8
(2700 / 2701/ 2704 /
2705 / 2718) or other commercially available connecting pipes:
1. Screw a GARDENA Connector
7
2763 (1
"
= 25 mm) /
2769 (5/4
"
= 32 mm) into the Irrigation Valve
3
.
2. Connect the GARDENA connecting pipes
8
or other commer-
cially available connecting pipes (25 mm / 32 mm).
To Next Page
