Gardena 19030 - 3. INITIAL OPERATION; Inserting Batteries into the Sensor

3. INITIAL OPERATION
To insert batteries:
The batteries are not included in the scope of delivery.
The Sensor must only be operated with 2 x alkalimanganese (alkaline)
batteries type LR6 (AA) (Mignon).
The operating period is approx. 6 months. The operating period can vary
depending on ambient temperature and transmission frequency.
CAUTION!
Rechargeable batteries should not be used!
756
N
1. Push the flap
5
and open the lid
6
.
2. Remove the battery holder
7
.
3. Insert the batteries into the battery holder
7
.
When doing so, ensure correct polarity
N
.
4. Insert battery holder
7
in the sensor.
5. Close the lid
6
.
7
EN