To select correct location:
Correct location:
The Sensor must be positioned at a location in the watering area which is
exposed to the same climatic conditions as the plants (sun, wind, rain, etc.)
for which a status is to be displayed.
Incorrect location:
The Sensor should not be covered by neighbouring plants.
Areas of shade should be avoided.
To rule out erroneous reaction results caused by waterlogging, the Sensor
should not be positioned in dips in the ground.
The sensor should not be positioned in places, where lawnmowers mow.
In direct sunlight, it should be noted that the measured ambient temperature
can differ from the actual temperature.
8
To Next Page
Loading...
