GB
15
6. Troubleshooting
DANGER ! Electric shock!
A
V Always unplug the mains plug and slide the
protective cover
1
over the cutter blade
2
before troubleshooting.
Fault Possible Cause Remedy
Hedge trimmer does not start Extension cable not plugged v Plug in the extension cable
in or is damaged. or if necessary replace it.
Cutting unit not locked in 0° or v Lock cutting unit in 0° or
90° position. 90° position.
Hedge is not cleanly cut Blade blunt or damaged. v Have blade replaced by
GARDENA-Service.
A
In the event of other faults please contact GARDENA Service.
Repairs should only be carried out by GARDENA service centres or dealers
authorised by GARDENA.
7. Accessories
GARDENA Maintenance Oil Extends the life of the blade. Art. 2366
8. Technical Data
ErgoCut 48 (Art. 8875) ErgoCut 58 (Art. 8876)
Power consumption, motor 550 W 550 W
Voltage / Frequency 230 V/ 50 Hz 230 V/ 50 Hz
Strokes 2,800/min. 2,800/min.
Length of cutter blade 48 cm 58 cm
Tooth gap of cutter blade 27 mm 27 mm
Weight 3.7 kg 3.8 kg
Workplace related
sound pressure level L
pA
1)
84 dB (A) 85 dB (A)
Noise emission value L
WA
2)
measured 94 dB(A) / measured 95 dB(A) /
guaranteed 95 dB (A) guaranteed 96 dB (A)
Hand / arm vibration a
vhw
1)
< 2.5 m/s
2
Measuring process complying with
1)
EN 774
2)
EU-directive 2000/14 / EC
To Next Page
Loading...
