7
GB
Scheduled watering:
1. Press Menu-key twice
(not necessary if the current time and day of the week
has been entered).
Start Prog
and the hours section flash on the display.
2. Set the watering start time hours with the rotary button (E.g.
6
)
and confirm with the OK-key.
Start Prog
and the minute display flashes on the screen.
3. Set the minutes for starting the watering time with the rotary
button (example:
20
minutes) and confirm with the OK-key.
Run Time
and the hours for the watering time flash on the
display.
4. Set the hours for the watering time with the rotary button
(example:
0
hours) and confirm with the OK-key.
Run Time
and minutes for the watering time flash on the
display.
5. Set watering time minutes with the rotary button
(example:
10
minutes) and confirm with the OK-key.
Watering cycle
8h
flashes on the display.
The watering frequency can be selected by:
• the (6.) watering cycle (right hand column of the display)
– or –
• the (7.) watering days (left hand column of the display).
6. Select watering cycle with the rotary button
(E.g. 2nd ) and confirm by pressing OK.
8h / 12h / 24h: Watering every 8 /12 / 24 hours
2nd/3rd/7th: Watering every 2nd / 3rd / 7th day
The display jumps to the watering programme on the screen.
– or –
7. Select each watering day with the rotary button
(E.g. Mo, Fr Monday and Friday) and confirm by pressing
OK. Press the Menu button.
The display jumps to the watering programme on the screen.
Entering watering
programme:
[Level 3]
1.
2.
3.
[Level 4]
4.
5.
[Level 5]
6.
7.
To Next Page
Loading...
Need help?
General
