128
GB
Emergency program (sensor flashes): If no sensor is inserted
or the sensor cable is faulty, watering is performed once per day
using the set watering duration (max. 30 mins.).
The valve can be opened or closed manually at any time.
The controller must be fitted.
1. Turn the rotary knob to On.
The valve is opened, the drips flash one after the other and
the watering duration flashes (preset to 30 minutes at the
factory) for 10 seconds in the display.
2. Whilst the watering duration is flashing, it can be modified
with the + button (between 1 and 59 minutes) (example:
15 minutes) and confirmed with the OK button.
3. Turn the rotary knob to Off to close the valve early.
The valve is closed.
The adjusted manual/sensor watering duration is saved and is
independent from the watering duration in the program, i.e. the
adjusted watering duration is preset for each future manual /
sensor valve opening.
Manual watering:
To Next Page
Loading...
Need help?
General
