Gardena EasyCut Li-18/23 R User Manual

For any other malfunctions please contact the GARDENA service department.
Repairs must only be carried out by GARDENA service departments or specialist
dealers authorised by GARDENA.
8. Available accessories
GARDENA
Replacement Battery BLi-18
Battery for additional duration or
for replacement.
Art. No. 9839
GARDENA Battery Charger
18 V
Charger to charge the GARDENA Batteries
BLi-18.
Art. No. 8833
GARDENA Spare Blades
for Turbotrimmer
Art. No. 5368
GARDENA
Replacement blade carrier
Available via the GARDENA Service.
9. Technical Data
Turbotrimmer EasyCut Li-18/23 R
(Art. No. 9823)
ComfortCut Li-18/23 R
(Art. No. 9825)
Cutting width 230 mm 230 mm
Rpm of blade carrier approx. 9300 rpm approx. 9300 rpm
Weight including battery approx. 2.8 kg approx. 3.1 kg
Workplace-related
emission values L
pa
1)
Uncertainty k
pa
75 dB (A)
3 dB (A)
68 dB (A)
3 dB (A)
Noise level L
WA
2)
Uncertainty k
WA
measured 83 dB (A) /
guaranteed 88 dB (A)
4.5 dB (A)
measured 82 dB (A) /
guaranteed 86 dB (A)
4.2 dB (A)
Hand / arm vibration a
vhw
1)
Uncertainty k
a
< 2.5 m/s
2
1.5 m/s
2
< 2.5 m/s
2
1.5 m/s
2
Battery lithium ion (18 V)
Battery capacity 2.6 Ah
Battery charging time approx. 3.5 h 80 % / approx. 5 h 100 %
Idling time * approx. 60 min. (with full battery)
Battery charger
Mains voltage 230 V / 50 – 60 Hz
Max. output current 600 mA
Output voltage 18 V (DC)
Measuring process complying with
1)
IEC 60335-2-91
2)
RL 2000/14/EC.
* The actual running time may differ from the stated idle time depending on application, type of cuttings and state of maintenance.
The stated vibration emission value has been measured according to a standardised
test procedure and can be used for comparison of one electric power tool with
another. It can also be used for preliminary evaluation of exposure. The vibration
emission value can vary during actual use of the electric power tool.
23
EN

Gardena EasyCut Li-18/23 R Specifications

General

Brand	Gardena
Model	EasyCut Li-18/23 R
Category	Trimmer
Language	English