Gardena smart system smart Sensor 19040 - Function

2. FUNCTION
The sensor measures the soil moisture at the root level of the plants and
the temperature near the soil automatically and sends the measured results
to the gateway. (The values can be read using the GARDENA smart App).
If the batteries are flat and are not replaced, the smart App will function
with the program selected.
V Replace batteries (see 3. INITIAL OPERATION „To insert batteries“).
Controls / Display:
2
3
1
1
Connection-LED:
Green flashing for 3 min.: During connection
Green illuminating for 1 sec: Sensor is connected
Red flashing for 10 sec: Sensor is not connected
2
Temperature sensor (inside the product)
3
Measuring area
6
en