GARDENA Battery Pole Pruner TCS Li-18/20
Translation of the original German operating instructions.
Please read the operating instructions carefully and observe the
notes given. Use these operating instructions to familiarise your-
self with the product, the proper use and the safety instructions.
For safety reasons, children and young people under the age
of 16, as well as people not familiar with these operating
instructions, may not use this product. Persons with reduced
physical or mental abilities may use the product only if they are
supervised or instructed by a responsible person. Children must
be supervised to ensure that they do not play with the product.
v Keep these operating instructions in a safe place.
Contents: 1. Area of applications of your GARDENA
Battery Pole Pruner .................................15
2. Safety Instructions .................................15
3. Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
4. Initial Operation ....................................19
5. Operation ........................................20
6. Putting into Storage ................................22
7. Maintenance ......................................22
8. Troubleshooting ...................................24
9. Available accessories ...............................25
10. Technical Data ....................................25
11. Service / Warranty ..................................26
1. Area of applications of your GARDENA Battery Pole Pruner
Correct Use: The GARDENA Battery Pole Pruner is intended for delimbing trees,
hedges, shrub and bushes with limbs of up to 8 cm in diameter in
private domestic gardens or allotments.
Compliance with these operating instructions is a prerequisite for
the proper use of this Pole Pruner.
Please note:
WARNING! Risk of injury!
The Pole Pruner must not be used for felling trees.
Cut branches into parts to ensure that you cannot be
struck by falling branches or that fallen branches can
bounce up from the soil.
Do not stand under the branch while cutting.
2. Safety Instructions
If not used properly this product can be dangerous. The warnings and safety instructions
must be followed to ensure reasonable safety and efficiency in using this product. The operator
is responsible for following the warnings and instructions in this manual and on the product.
Never use the product unless the guards provided by the manufacturer are in the correct
position.
15
To Next Page
Loading...
Need help?
General
