EasyManua.ls Logo

Gardenic ZSPW400-D - User Manual

Gardenic ZSPW400-D
86 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
EN
Original instructions
Instruction manual
DIRTY WATER PUMP
ZSPW400-D (VC400ECH)
ADEO Services
135 Rue Sadi Carnot – CS00001
59790 RONCHIN - France
Made in P.R.C. 2019

Table of Contents

Questions and Answers

  • L
    Laura WilliamsAug 2, 2025
    What to do if my Gardenic Swimming Pool Pump doesn’t start or stops suddenly?
    • A
      Anthony RussoAug 2, 2025
      If your Gardenic Swimming Pool Pump doesn't start or suddenly stops, it could be due to several reasons. First, the thermal overload switch might have turned off the pump because of overheating. In this case, disconnect the plug and clean the turbine, and make sure that you are observing the maximum media temperature of 35 degrees. Another possible cause is a lack of power, so check your fuses and electrical connections. Lastly, dirt particles may be stuck in the suction base. If this is the case, disconnect the plug and clean the suction base.
  • M
    Michelle HuffAug 16, 2025
    Why is my Gardenic ZSPW400-D Swimming Pool Pump running, but not delivering water?
    • C
      cpooleAug 16, 2025
      If your Gardenic Swimming Pool Pump is running but not delivering water, it could be due to a few reasons. Check if the pressure line is closed or kinked, preventing air from escaping; if so, open the pressure line. Also, air locks in the suction base may be the problem; wait up to 60 seconds for the pump to automatically vent via the vent valve, and if needed, switch the pump off and on again. Another potential issue is a clogged turbine, which you can resolve by disconnecting the plug and cleaning the turbine. Finally, ensure the water level isn't falling below the minimum when starting the pump; if it is, submerge the pump deeper.

Summary

Product Features and Specifications

Product Features Overview

Lists and illustrates the main components of the dirty water pump.

Technical Specifications

Details key performance data including voltage, power, flow rate, and dimensions.

Safety Instructions

General Safety Warnings

Essential safety guidelines for pump operation, covering handling, electrical safety, and usage restrictions.

Usage and Application Safety

Details safety requirements for pump usage, including limitations on water type, operating environment, and continuous use.

Installation and Hose Connection

Installation Guidelines

Provides instructions for pump installation in domestic use, sumps, and general placement.

Hose Connection Guide

Illustrates how to connect various hose sizes (13-19mm, 25mm, 32mm) to the pump's universal fitting.

Operation and Maintenance

Pre-Operation Checks

Steps to perform before starting the pump, including checking for damage and float switch function.

Pump Operation

Explains how the float switch controls automatic start and stop, and how to connect the power cable.

Care and Maintenance

Instructions for cleaning and storing the pump, emphasizing safety and material use.

Troubleshooting and Disposal

Trouble-Shooting Guide

Lists common problems, probable causes, and remedies for pump operation issues.

Recycling Information

Guidance on environmentally responsible disposal and recycling of the pump and packaging.

Exploded View

CE Declaration of Conformity

Gardenic ZSPW400-D Specifications

General IconGeneral
ModelZSPW400-D
Power400W
Max Head8m
Voltage220-240V
Frequency50Hz
Inlet/Outlet Size1.5 inch

Related product manuals