OWNER’S MAINTENANCE MANUAL -3-
• Have a center guide and mark the location of the entrance to ease the installation process.
• Ensure that you are holding the correct piece and attaching it to the correct location.
• The Gardenigloo is a symmetrical structure, one side should mirror the other.
• During installation, if a wrong piece has been attached elsewhere, in future steps of installation some
parts may eventually come too short and/or build stress on the structure, at the risk of
breaking or cracking.
• When inserting a Strut piece into a joint connector, do not force or bend the joint into a perpendicular
angle to the joint. This may risk breaking.
• Using WD-40 as lubricant may assist you to install your Gardenigloo in case you are having trouble
getting the struts/joints to connect completely.
CENTER
ENTRANCE
To Next Page
Loading...