Gardenline EA-3198 - Setting Up the Heater; Operating the Heater

Setting up the device
1. Remove the cable tie on the
power cable
2
.
2. Place the device
1
on a level
surface.
3. Plug the power cable into a
socket.
The device is set up.
Operation
CAUTION!
Danger of burns!
Careless handling of the device can cause burns.
- When using the device or if it is still hot from use, do not
touch any part of the device other than the controls.
- Allow the device to completely cool down before moving
or cleaning it.
A
1
2
Before first use
12