Need help?Do you have a question about the GARDINER TECHNOLOGY Gardtec 800 and is the answer not in the manual?
General| Brand | GARDINER TECHNOLOGY |
|---|---|
| Model | Gardtec 800 |
| Category | Control Panel |
| Language | English |
Details setting the system using an area code on the Gardtec 840 model.
Explains how to set the system using 1, 2, or 3 part set codes for different zones.
Explains system setting procedures using area codes for the Gardtec 840.
Details the process for removing individual zones from the system.
Explains how to test the system, including zone status and device testing.
Details system testing procedures, including zone status and device checks.
Describes how to navigate and view events recorded in the system log.
Explains how to change the chime status between On and Off.
Guides on programming new user codes into the system.
Details the procedure for setting the system's date and time.
Explains how to initiate and use the remote access feature for system checks.
Describes the procedure for resetting the system after an alarm event.
Explains how to set the alarm system using LED keypads.
Details system setting using area codes on LED keypads for specific zones.
Explains system setting procedures using area codes for the Gardtec 840.
Details the process for removing individual zones from the system via keypad.
Describes system testing procedures including zone status and device checks on LED keypads.
Guides on navigating and viewing events recorded in the system log using a master code.
Explains how to change the chime status (On/Off) using a master code.
Details programming user codes into the system using a master code.
Details the procedure for setting the system's date and time on LED keypads.
Explains how to initiate remote access as instructed by the installation company.
Describes the procedure for resetting the system after an alarm event, including error handling.
Details programming ACE keyfobs onto multiple receivers, ensuring continuous button press.
To Next Page
