Need help?Do you have a question about the GARDINER TECHNOLOGY Gardtec 840 and is the answer not in the manual?
Describes the 3 models (800, 816, 840) and 2 display variations (16-char text, 7-segment LED) available for the Gardtec system.
Explains the 7 different user code types and their associated access levels for system operation.
Details the 47 user code types and their functions for the Gardtec 840 model.
Explains how to operate the system using normal and biased keyswitches.
Details system setting procedures using different code types, including area-specific settings.
Describes the process for removing individual zones from the system.
Explains how to start the system test sequence and what to expect.
Details the various system test modes and their corresponding display messages.
Guides on accessing and interpreting system event logs.
Describes how to view and change the chime status of the system.
Details the process of assigning new user codes and their types.
Explains how to input user names and the actual codes for programming.
Covers the procedure for setting the system's date and time.
Details the method for entering user names using the keypad character map.
Explains the steps to start a remote access session.
Describes the displays shown during remote access and error handling.
Guides on how to reset the system following an alarm event.
Explains different reset modes and required actions.
Details the process involving anti-codes for system resets.
Explains how to set and unset the system using LED keypads.
Covers setting procedures using Master, Main, and Area codes on LED keypads.
Describes zone removal and system testing using LED keypads.
Guides on accessing and interpreting the event log using LED keypads.
Explains chime status and user code programming using LED keypads.
Covers setting date/time using LED keypads.
Details remote access and alarm reset procedures when using LED keypads.
Provides explanations for various LED display codes and their meanings.
Explains the meaning of particular entries found in the event log.
Explains the procedure for programming remote keyfobs for ACE control, including user number assignment.
Covers how ACE keyfobs are used and any restrictions or specific conditions.
General| Brand | GARDINER TECHNOLOGY |
|---|---|
| Model | Gardtec 840 |
| Category | Control Panel |
| Language | English |
To Next Page
