GARDTECH GT38005 - Technical Specifications; Product Specifications; Noise and Vibration Information; Minimizing Noise and Vibration

GB
NL
DE
FR
12
8.
Electric pole-mounted chain saw GT38005(HCSEG01B)
Rated Voltage 230-240 V ~ / 50 Hz
Nominal Consumption 710 W
No-load Speed 6500rmp
Guide Bar 180 mm
Cutting length ca. 17,5 cm
Variable height adjustment from 2.05 m to 2.80 m
Chain speed 500 m/min
Oil 65ml
Weight with bar+chain 4.0 kg
Chain type 91P033X
Guide Bar type 080SDEA318
Class of Protection
II
Sound Pressure Level EN ISO 11680-1:2008 LWA=98.5 dB(A)
Vibration EN ISO 11680-1:2008 1,92m/s
2
K = 1,5 m/s
2
Noise emission information in accordance with the German Product Safety Act (ProdSG) and the EC Machine Direc-
tive: the noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator will require noise
protection (e.g. wearing of ear protectors).
Attention!
The vibration value will change on the basis of the area of application of the electric tool and may lie above the
Keep the development of noise and vibration to a minimum!
• Only use properly functioning machines.
• Maintain and clean the machine regularly.
• Adapt your working method to the machine.
• Do not overstress the machine.
• If necessary, have the machine inspected.
• Switch the machine off when it is not in use.
• Wear work gloves.
Attention: Noise protection! Please observe the local regulations when operating your device.