Need help?Do you have a question about the GARDTECH GT38005 and is the answer not in the manual?
Safety warnings and instructions for power tools, including electric shock, burns, and severe injury.
Keeping the workplace clean, avoiding explosive environments, and keeping children/others away.
Proper plug fit, avoiding earthed surfaces, keeping the tool dry, and using RCDs.
Paying attention, wearing PPE, avoiding unintentional operation, and proper posture.
Not overtaxing the tool, maintaining it, keeping cutting tools sharp, and proper use.
Servicing by qualified personnel using original spare parts.
Keep the cable clear of the cutting area to prevent accidental damage.
Keep body parts away from the chain, ensure the chain doesn't touch objects before starting.
Hold the saw with the right hand at the rear and left hand at the front handle.
Wear eye and hearing protection, and consider other PPE for injury reduction.
Avoid operating the chain saw while on a tree due to high injury risk.
Maintain a safe stand on solid, level ground for control.
Account for branch spring-back when cutting tensioned branches.
Be cautious with brush and young trees as thin material can catch the chain.
Carry the saw with the chain pointing away from the body using the front handle.
Use the protection cover during transport or storage to avoid touching the chain.
Follow instructions for lubrication and chain tension to prevent breakage or kickback.
Keep handles dry and clean to prevent slipping and loss of control.
Use the saw only for wood, not for plastics, brickwork, or other materials.
Do not use incomplete or altered machines, or by inexperienced persons.
Persons under 16 are not permitted to operate these devices.
Ensure the device is not operated during adverse weather or lightning risk.
Prolonged use can cause vibration-related syndromes; wear gloves, maintain the tool, and take breaks.
Emphasizes reading instructions to prevent severe injuries.
Wear eye, ear, and head protection against falling objects.
Always wear safety boots and gloves when operating the device.
Clothing should be sturdy, snug-fitting, and allow freedom of movement.
Immediately unplug if the power cord or plug is damaged.
Do not use the tool in wet weather conditions.
Indicates the device has double insulation for electrical safety.
Confirms conformity with European Community Directives.
Device must not be disposed of with household waste; use designated collection points.
Maintain a minimum clearance of 10 m from current-carrying lines to avoid electric shock.
Lists and describes key parts of the chainsaw, like cable, handle, arm, and chain.
Use for removing branches from trees; not for extensive sawing or non-wood materials.
General assembly instructions, emphasizing connection to mains only after assembly.
Step-by-step guide for fitting the guide bar and chain onto the chainsaw.
Procedure for adjusting chain tension for safe operation and checking periodically.
Instructions for filling the oil tank and importance of lubrication.
How to adjust and lock the extendable arm to the desired length.
Connecting the chainsaw to a suitable and safe power source.
Correct procedure for powering the chainsaw on and off.
Ensuring the chainsaw, oil, and chain are in good working order before use.
Mandatory wear of PPE, including clothing, helmet, goggles, and hearing protection.
How to properly wear and attach the shoulder belt for carrying.
Guidelines for safe operation, including angles, positioning, and hazard awareness.
Methods for cutting branches, including angles and handling weight changes.
Technique for cutting smaller branches from top to bottom.
Method for cutting larger branches using relief cuts.
Explains kickback, its causes, and the risk of severe injury.
Tips to avoid kickback: correct chain tension, sharp chain, and proper grip.
Precautions for sawing tensioned wood due to uncontrolled reactions.
Detailed technical data including voltage, power, speed, and dimensions.
Details on sound pressure level and vibration values, with safety advice.
Tips to reduce noise and vibration: use functional machines, maintain, adapt methods.
Guidance on when and how to replace the guide bar and chain.
Procedure to verify the automatic oiling system functions correctly.
Advice on maintaining chain sharpness for effective and safe cutting.
Instructions for cleaning the chainsaw and storing it safely.
Guidelines for responsible disposal of the machine and packaging.
Information required when ordering replacement parts.
Table of common faults and their remedies.
Declaration of compliance with relevant EU directives and standards.
To Next Page
General