EasyManua.ls Logo

Gardus LintEater - Using Leaf Blower for Cleaning; Vacuum;Blower Assisted Brushing

Gardus LintEater
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
AdditionalCleaningMethods
UsinganElectricLeafBlowertoblowtheloosenedlintoutoftheventwhile
rotarybrushingfromoutside
An electric blower can also be a ttached to the vent on
the inside to blow the lint out while you rotary brush
from the outside toward the inside.
ImportantNote:
a) Connect the Dryer Adapter between the blower
& vent to prevent the brush from entering into
the blower.
b) Always wear eye protection & a respirator.
Rotarybrushingfromoutsidewith
vacuumconnectedoutside
This is not a preferred method but the cleaning
can be done this way.
ImportantNote:Only use this method with the
DryerAdapterinstalled at the opposite end of
the vent on the interior. This will stop the brush
when it reaches the end of the vent.
Method2
Method3