19
Addional Cleaning Methods
Rotary brushing from inside with vacuum
connected outside
a) Connect the vacuum hose to the exterior vent
hood.
b) Rotary brush from the inside toward the exterior
while the vacuum collects the loosened lint on
the outside.
Cleaning by Hand from the Inside or Outside
a) Thread 4” Auger Brush onto flexible rods.
4. Rotate rods in a clockwise direcon while using a
back and forth moon to remove the lint from the
dryer vent.
Included rods will clean 18’ of venng when used from
each end.
Note: A shop vac, electric leaf blower or the air from
the dryer should be used to remove the loosened lint
while brushing the vent.
Method 4
Method 5
To Next Page
Loading...