Need help?Do you have a question about the Garelli 49cc and is the answer not in the manual?
Filling the oil injector reservoir with the proper oil.
Bleeding air from the oil feeder line before connection.
Recommended checks and service tasks every 300 miles.
Recommended service tasks every 1200 miles.
Recommended service tasks every 2000 miles.
Removing carbon from the muffler and exhaust pipe.
Removing carbon deposits from the cylinder head.
Cleaning carbon from the cylinder block and piston ring grooves.
Torque values for cylinder head and flywheel nuts.
Torque values for driving gear nut and chain sprocket nut.
Removing the top cover and disconnecting the clutch cable.
Installing flywheel and checking ignition timing.
Identification of stator plate, coils, and flywheel.
Spark plug cleaning, gapping, and heat value selection.
Adjusting the points gap using a set screw.
Adjusting ignition timing by rotating the stator plate.
Organized method for determining causes of malfunction.
Symptoms, problems, and reasons for ignition and fuel/air issues.
Checking fuel flow and spark for starting problems.
Common causes for weak or absent spark.
To Next Page
General