To Next PageTo Next PageWhat to do if the Garland Broiler screen is locked or frozen?
If the screen on your Garland Broiler is locked out, frozen, or non-responsive to touch, it may be due to a software issue. Turn the broiler off using the main power switch, wait 10 seconds, and then turn it back on. If that doesn't work, connect a mouse to the USB port to check for pointer movement.
How to fix Garland CXBE12 Broiler IR too hot or cool?
To address issues with the Garland Broiler's IR being too hot or cool, begin by checking for continuity. Ensure the correct TC is connected to the correct input, and inspect the wiring for continuity. Verify the state of the switch, measuring current to confirm it is below the trip point. Also, check the settings and ensure that cool or high-volume air is not directed at the broiler.
What to do if my food is overcooked in the Garland CXBE12 Broiler?
Your product might be overcooked in the Garland Broiler due to several reasons: * Selecting the wrong recipe. * Setting the cook time too high. * Using raw product that's too warm or too thick. * Poor quality raw product. * The broiler was over temperature before starting the cycle. * The broiler temperature is incorrect. To fix this, select the correct recipe, decrease the cook cycle time, ensure the raw product is at the correct temperature and thickness, use newer product, check the zone temperatures versus the set point, and refer to the section on temperature issues.
Why are the grates or IR too hot on my Garland CXBE12 Broiler?
If the grates or IR are too hot on your Garland Broiler, it's likely because the recipe set points are too high. You can use the temperature status screen to check the zone temperatures versus the set point.
What causes the grates or IR to be too cool on my Garland Broiler?
If the grates or IR are too cool on your Garland Broiler, it could be due to recipe set points being too low, or kitchen ventilation affecting the temperatures. Check the zone temperatures versus the set point using the temperature status screen and check whether cool or high volumes of air are directed towards the broiler.
Why is there no sound on my Garland Broiler?
If there is no sound coming from your Garland Broiler, the volume might be set too low. Try setting the volume to high.
What to do if my Garland CXBE12 Broiler screen is frozen?
If the screen of your Garland Broiler is locked, frozen, or unresponsive to touch, try rebooting it. If that doesn't work, try using a mouse in the USB port.
Why is my Garland CXBE12 Broiler under cooked?
If your food is undercooked in the Garland Broiler, you should check the internal temperature of the food to see if it's possibly frozen. Also, inspect the recipe settings and ensure that all elements and grates are clear of any carbonized buildup.
What to do if my Garland CXBE12 has loss of temperature?
If you notice a loss of temperature in your Garland Broiler, raise the setpoint and see if the LED on the SSRB lights up. Also, check the condition of the SIB TC inputs, and verify that the temperatures are not outside the maximum limits (600 F on grates, 800 F on IR’s) or below 0 F, as this will trigger a fault. Ensure you check the settings.
What to do if Garland Broiler motor will not move?
If the motor of your Garland Broiler won't move, check the SIB 10 amp fuse, position switches for actuator travel, and ensure the cross member is not on the overtravel switch.
Procedures and requirements for properly grounding the electrical connection.
Key safety warnings and precautions regarding electrical connections and usage.
Steps to verify the broiler's temperature accuracy after installation.
General instructions for operating the clamshell broiler.
Procedures for safely shutting down the appliance.
Important warnings and cautions related to the use and care of the unit.
Information on how to obtain service and replacement parts for the broiler.
Step-by-step guide for routine daily cleaning of the broiler.
Step-by-step guide for initiating a cooking cycle using the easyToUCH™ screen.
Detailed steps for selecting and cooking a specific recipe.
Explanation of various warning messages displayed on the screen.
Procedures and requirements for properly grounding the electrical connection.
Key safety warnings and precautions regarding electrical connections and usage.
Steps to verify the broiler's temperature accuracy after installation.
General instructions for operating the clamshell broiler.
Procedures for safely shutting down the appliance.
Important warnings and cautions related to the use and care of the unit.
Information on how to obtain service and replacement parts for the broiler.
Step-by-step guide for routine daily cleaning of the broiler.
Step-by-step guide for initiating a cooking cycle using the easyToUCH™ screen.
Detailed steps for selecting and cooking a specific recipe.
Explanation of various warning messages displayed on the screen.
General