Do you have a question about the Garmin DESCENT MK2I and is the answer not in the manual?
Display type | Digital |
---|---|
Color display | Yes |
Display diagonal | 1.4 \ |
Display resolution | 280 x 280 pixels |
Display technology | MIP |
Shape | Round |
Band size | - |
Band color | Black |
Band material | Titanium |
Lens material | Sapphire |
Product color | Carbon |
Watch case size | 52 mm |
Watch case color | Grey, Titanium |
Waterproof up to | 100 m |
Market positioning | Smartwatch |
Protection features | Water resistant |
Watch case material | Polymer |
Flash memory | 32 GB |
Mobile operating systems supported | iOS |
Recommended activity | Climbing, Cycling, Diving, Fitness, Golf, Hiking, Running, Skiing, Swimming |
Heart rate data transfer | Bluetooth/ANT+ |
Battery life | 16 h |
Battery type | Built-in battery |
Battery capacity | - mAh |
Battery life (max) | 384 h |
Battery life (GPS mode) | 48 h |
Height | 17.8 mm |
Number of batteries supported | 1 |
Quantity per pack | 1 pc(s) |
Steps to set up the watch for the first time and learn basic features.
Critical safety information and warnings related to diving with the device.
Setting up gas blends for dive modes, including decompression gases.
Setting partial pressure of oxygen (PO2) thresholds for alerts.
Recommendations for proper first-time installation and setup of the transmitter.
How to use the dive compass and set headings for underwater navigation.
Setting up emergency contact phone numbers for safety features.
Enabling or disabling incident detection for outdoor activities.
How to use the watch to make purchases in participating stores.
How to wear the device for accurate wrist-based heart rate readings.
Steps to get an accurate VO2 max. estimate for running activities.
Performing a guided test to estimate lactate threshold, requiring a chest heart rate monitor.
Performing a guided test to determine functional threshold power (FTP).
Manually taking pulse oximeter readings and viewing widget details.
Following daily suggested workouts based on training status and VO2 max. estimate.
Downloading PacePro plans from Garmin Connect to create custom pace bands.
Using Virtual Partner as a training tool to set pace and race against it.
Navigating to a destination or following a course using the device.
Adjusting system, activity, and GPS settings to extend battery life during activities.
Steps to pair wireless sensors like heart rate monitors and the device.
Tips to resolve issues with connecting the smartphone to the device.
Tips for resolving underwater connection loss between transmitter and watch.