Need help?Do you have a question about the Garmin Fishfinder 100 Blue and is the answer not in the manual?
Display| display resolution | 240 W x 240 H pixels |
|---|---|
| display size | 4.6" diagonal (11.7 cm) |
| display type | FSTN LCD with white LED backlighting |
Power| sonar power output (RMS) | 500 watts |
|---|---|
| sonar power output (peak to peak) | 4000 watts |
| power usage | 12 watts max |
Frequency and Depth| frequency | 50/200 kHz (40º/10º) |
|---|---|
| max depth | 1500 foot |
Weight and Dimensions| dimensions | 6.3"W x 4.93"H x 3.0"D (16 x 12.5 x 7.6 cm) |
|---|---|
| weight | 1 lb. 6 oz. |
| waterproof rating | IPX-7 |
Display| display resolution | 160 W x 160 H pixels |
|---|---|
| display size | 4.6" diagonal (11.7 cm) |
| display type | FSTN LCD with incandescent backlighting |
Power| sonar power output (RMS) | 500 watts |
|---|---|
| sonar power output (peak to peak) | 4000 watts |
| power usage | 12 watts max |
Frequency and Depth| frequency | 50/200 kHz (40º/10º) |
|---|---|
| max depth | 1500 foot |
Weight and Dimensions| dimensions | 6.3"W x 4.93"H x 3.0"D (16 x 12.5 x 7.6 cm) |
|---|---|
| weight | 1 lb. 6 oz. |
| waterproof rating | IPX-7 |
Display| display resolution | 100 W x 160 H pixels |
|---|---|
| display size | 3.9" diagonal (9.9 cm) |
| display type | FSTN LCD with amber LED backlighting |
Power| sonar power output (RMS) | 300 watts |
|---|---|
| sonar power output (peak to peak) | 2400 watts |
| power usage | 7 watts max |
Frequency and Depth| frequency | 50/200 kHz (40º/10º) |
|---|---|
| max depth | 1200 foot |
Weight and Dimensions| dimensions | 5.3"W x 4.9"H x 2.7"D (13.5 x 12.5 x 6.9 cm) |
|---|---|
| weight | 13 oz. |
| waterproof rating | IPX-7 |
Details GARMIN's one-year limited warranty, covering defects in materials and manufacture.
Explains the function and types of transducers used with the sonar unit.
Provides essential tips and instructions for properly mounting the transducer on a boat.
Specific steps for installing a transom-mounted transducer on a boat hull.
Instructions for mounting a transducer inside the boat's hull for a shoot-thru installation.
Details on connecting the unit's wiring harness to the boat's power supply.
Procedures to verify the correct setup and initial operation of the installed unit.
Explains basic sonar principles and how the unit displays data.
Details the area covered by different transducer frequencies and beam angles.
Describes the various alarm messages and icons displayed by the unit when triggered.
To Next Page
