FORCE
®
TROLLING MOTOR REMOTE CONTROL
REPLACEMENT INSTRUCTIONS
Installing Batteries
The remote control operates using two AA batteries (not included). Use lithium batteries for best results.
1 Turn the D-ring counter-clockwise, and pull up to remove the cover.
2 Insert two AA batteries, observing polarity.
3 Replace the battery cover, and turn the D-ring clockwise.
Getting Started
This is a replacement accessory for a compatible Garmin
®
trolling motor.
For full usage instructions, see the quick start manual provided with your trolling motor, or download the full
owner's manual from support.garmin.com.
Attaching a Lanyard
1 Starting from the back of the remote control, insert the loop of the lanyard through the slot.
2 Thread the other end of the lanyard through the loop, and pull it tight.
3 If necessary, place the lanyard around your neck or wrist to tether it during use.
GUID-20499773-47B2-42B7-BD52-80A52A588B3D v3July 2023
To Next Page
Need help?
General
