Need help?Do you have a question about the Garmin GPS 165 and is the answer not in the manual?
General| Water Rating | IPX7 |
|---|---|
| Voice Guidance | Yes |
| Lane Guidance | Yes |
| Speed Limit Indicator | Yes |
| Receiver | GPS |
| Voltage Input | 12V |
| Connectivity | USB |
| Memory | 8 MB |
| Preloaded Maps | Yes |
| Traffic Updates | Yes |
Discusses considerations for installing the GPS antenna for optimal performance.
Details marking, drilling, and mounting the antenna, including using a doubler plate for thin-skinned aircraft.
Guides on routing coax cable, trimming it, installing BNC connectors, and crimping contacts for wiring harnesses.
Explains how to prepare the avionics stack opening, connect harnesses, and mount the GPS 165 unit.
Describes how to enter and navigate TEST MODE for verifying unit functions.
Guides on configuring the unit's inputs and outputs to match installed equipment.
Introduces a series of display pages to test various unit functions.
Details how to test the CDI (Course Deviation Indicator) and flags for TO/FROM and NAV.
Describes how to test the OBI (Omni Bearing Indicator) for valid and invalid data.
Explains how to perform loopback tests for RS232, RS422, and ARINC 429 channels.
Guides on testing MSG, Arrival, and Approach annunciators for ON/OFF status.
Guides on performing a signal acquisition test and checking GPS position information.
To Next Page
