GPSMAP 3005C Quick Reference
START UP SEQUENCE
MAIN PAGE SEQUENCE
SELECTING FUNCTIONS
© Copyright 2005 Garmin Ltd. or its subsidiaries. All Rights Reserved
Garmin International, Inc. 1200 East 151
st
Street, Olathe, Kansas 66062, U.S.A.
Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9DL, U.K.
Garmin Corporation No. 68, Jangshu 2
nd
Road, Shijr, Taipei County, Taiwan
FUNCTION ADJUSTMENTS
To display adjustment options:
Press the ADJ key.
Map Page Compass Page
POWER OFF
To turn on the GPSMAP 3005C:
1. Press and hold the POWER key.
2. Press ENTER to acknowledge the Introduction page.
3. To view the GPS status, press and hold ADJ/MENU for two seconds, and highlight the GPS tab
on the Main Menu using the ROCKER.
4. Press QUIT to return to the Map page.
To turn off the GPSMAP 3005C:
Press and hold the POWER key
for approximately two seconds.
If one MFD is connected, the unit
shuts down. If multiple MFDs are
connected, a prompt appears.
Select Yes to shut down the
entire network, or select No to
put the unit in sleep mode.
To Find an item:
1. Press FIND to display the Find From Current Position page.
2. Use the ROCKER to highlight a category, and press ENTER.
3. Use the ROCKER to highlight the item for which you want to see
more details, and press ENTER.
FIND
Highway Page
To cycle through available
functions:
Press FCTN to highlight the
next available function on the
split screen.
Additional Main pages appear as you add optional hardware to the Garmin Marine Network.
To add/remove functions for
a Main page:
1. Press and hold DATA/CNFG
for two seconds to access the
Configuration page.
2. Using the ROCKER, highlight
the Function you want to add
or remove, and press ENTER.
To Next Page
Need help?
General
