Do you have a question about the Garmin GPSMAP 8616xsv and is the answer not in the manual?
Display Resolution | 1920 x 1080 pixels |
---|---|
Touchscreen | Yes |
Sonar | Yes |
Wi-Fi | Yes |
Bluetooth | Yes |
Garmin Marine Network Ports | 2 |
Water Rating | IPX7 |
Antenna | Internal or external over NMEA 2000 |
NMEA 0183 Input Ports | 1 |
NMEA 0183 Output Ports | 1 |
NMEA 2000 Ports | 1 |
Wireless Connectivity | Yes |
J1939 Ports | 1 |
Radar Support | Yes |
GPS Receiver | 10 Hz |
Mounting Options | Bail or flush |
Video Input Ports | 2 |
Power Input | 10-32 Vdc |
Display Size | 15.6 inches |
Using voice commands to control the chartplotter with a compatible headset.
List of commonly used voice commands for chartplotter operation.
Instructions for connecting a mobile device to the GPSMAP device using the app.
Steps to enable receiving notifications from a mobile device on the chartplotter.
How to update device software and charts using the ActiveCaptain app.
Procedure for navigating to a selected location on the chart.
Enables identification and tracking of other vessels via AIS.
Overview of the three primary methods for navigating to a destination.
Instructions for creating, managing, and navigating to waypoints.
Guidance on creating, saving, editing, and navigating routes.
Features for recording, saving, viewing, and navigating tracks.
Features to assist with precise race start line crossings.
Visual guidance for crossing the start line at the optimal time and speed.
Autopilot feature to maintain a specific bearing relative to the current wind angle.
Autopilot functions for performing tacks and gybes.
Overview of Panoptix sonar views for real-time underwater imaging.
Procedure to set the transducer type for optimal sonar function.
Access to transducer setup and sonar return appearance settings.
Configuration and types of sonar alarms for situational awareness.
Settings related to the installation and configuration of transducers.
Explanation of sonar frequencies and how they adapt to water depth and goals.
Setup options for Panoptix sonar views, including angle and zoom.
Steps for transmitting radar signals and entering standby mode.
Mini-Automatic Radar Plotting Aid for target identification and collision avoidance.
Configuration options for optimizing the radar display.
Adjusting sea clutter, rain clutter, and scan averaging for radar clarity.
Access to radar features like MotionScope, Echo Trails, VRM/EBL, and Guard Zone.
Options for radar source, chart display, orientation, and appearance.
Settings for radar scanner location, antenna configuration, and transmit zones.
Steps for configuring the autopilot system for the boat.
Overview of the surround view camera system for vessel visibility.
Settings for units, language, navigation preferences, and filters.
Settings for NMEA 0183 and NMEA 2000 connections and output.
Configuration for transducers, depth, fuel, vessel type, and steering.