Garmin iQUE 3600 Setup Guide

Step 8: Load maps to your iQue
Your iQue 3600 has 32MB of internal memory (about 22MB available for
use). You can load detailed maps to internal memory or an SD memory
card. When selecting maps, do not exceed your storage capacity.
Launch Palm
™
Desktop on your computer. Click the MapInstall icon.
Follow the instructions on your computer screen to use the MapInstall
Wizard.
Click the regions on
the map that you want
to load into your iQue.
Click Next. Select a
user and select the
location where you
want the new maps
stored. Click
Next.
To transfer the maps to
your iQue, perform a
HotSync
®
operation.
iQue
®
3600
Start Here
Open this setup guide and follow the
instructions to set up your iQue 3600.
Complete all of the setup steps:
Step 1: Charge the iQue
Step 2: Set up the iQue
Step 3: Install Palm
™
Desktop
Step 4: Perform a HotSync
®
operation
Step 5: Load maps to your PC
Step 6: Unlock maps
Step 7: Register your iQue
Step 8: Load maps to your iQue
setup guide
190-00270-02 Rev. A
Click to zoom in and
out of the map.
Click the arrows and drag
the sliders to move the map.
Selected map regions.
Click Next to load the
maps to your iQue.

Garmin iQUE 3600 Specifications

General

Auto	Yes
Marine (chartplotters, sounders)	No
Channels quantity	12 channels
GPS accuracy - position	15 m
GPS accuracy - velocity	0.05 m/s
Routes quantity	50
Tracks quantity	32
Number of waypoints	4000
Interface	USB, Infrared, RS232
Antenna type	Flip-up, adjustable GPS
GPS receiver	WAAS-enabled
Compatible operating systems	Windows 98/2000/ME/XP
Bundled software	Palm OS 5.2.1
Minimum processor	Intel® Pentium®
Minimum system requirements	CD-ROM
Map storage	Internal storage
Display resolution	320 x 480 pixels
Display size (HxV) (imperial)	3.8 \
Operating temperature (T-T)	0 - 50 °C

Weight and Dimensions

Depth	20.3 mm
Width	72.1 mm
Height	127 mm
Weight	164.9 g