2 of 5
TS-1XT Operator Manual
DISPOSAL
Disposing of the machine:
Dispose of the machine in an environmentally sound
fashion at the end of its useful service life. Do not
dispose of any of the parts included in the machine or its
packaging with household trash.
US
This shipment was packaged and delivered to the carrier with utmost
care to ensure safe delivery of goods to you, our valued customer.
PLEASE RETAIN ALL SHIPPING MATERIALS FOR FUTURE USE.
In the event that you need to transport the unit to a different location or
to the factory for repair service, you must package it for safe delivery.
Failure to do so may result in freight damage and will void the factory
warranty. Please contact Garner Products, Inc. at (800) 624-1903 for
further information if required.
* All mounting hardware must be removed prior to degaussing.
SPECIFICATIONS
Part Numbers TS-1XT, TS-1XTE
Certifications CE
Magnetic Field 2 Tesla (20,000 Gauss) nominal
Erasure Verification SCAN-1 included IRONCLAD optional
Charge Time 15 seconds (nominal)
Throughput
(hard drives per hour)
Up to 1300 (1.8 in.)
Up to 875 (2.5 in.)
Up to 150 (3.5 in.)
Media Hard drives: Laptop, standard, and network drives*
up to 1.25 in. in height
Tape media: All LTO, all DLT, AIT, 2590 Series,
8mm, and others
Power TS-1XT: 110~125VAC ±5%, 50/60 Hz
TS-1XTE: 90~250VAC ±5%, 50/60 Hz
Power Consumption During standby: 108W
During charge: 1272W
At the time of erase: 120W
Degausser System Capacitive Discharge
Duty Cycle Continuous
Drawer Capacity (HxWxD) 1.25 x 4.3 x 5.9 (in.) 31.8 x 108 x 148.6 (mm)
Temperature 41°F - 104°F (5°C - 40°C)
Humidity 10%H - 40%H (without condensation)
Weight 105 lbs. (47.67 kg)
Size (HxWxD) 16.9 x 9.8 x 24.8 in. (429.5 x 247.7 x 628.7 mm)
Warranty TS-1XT: One-year manufacturer’s limited warranty
standard, optional three year limited warranty
available.
TS-1XTE: One-year manufacturer’s limited
warranty standard.
Made in U.S.A. By Garner Products, Inc.
To Next Page
Loading...