Need help?Do you have a question about the GarrettCom Magnum MNS-6K and is the answer not in the manual?
Lists prerequisite hardware and software needed for initial switch configuration.
Explains how to connect to the switch via the DB-9 RS232 console port using a terminal emulator.
Details serial port settings for terminal emulation software like HyperTerminal.
Provides default manager and operator usernames and passwords for initial login.
Explains how to configure IP address, subnet mask, and default gateway.
Explains the Manager and Operator privilege levels and how to switch between them.
Explains adding, deleting, and managing user accounts and their limits.
Explains why an IP address is crucial for managing the switch.
Explains automatic IP address assignment methods using DHCP and bootp.
Explains the 'set bootmode' command for configuring IP address acquisition methods.
Explains how telnet is enabled by default and how to manage sessions.
Explains querying and changing system parameters using 'show sysconfig' and 'show setup'.
Explains saving/loading configurations to/from a server using saveconf/loadconf commands.
Outlines commands for configuring IPv6, including the 'ping6' command.
Explains changing default passwords using the 'set password' command.
Explains blocking computers by validating MAC addresses and violation modes.
Details entering port-security configuration mode and its options.
Explains allowing or blocking IP addresses for switch access.
Details commands for configuring 802.1x parameters, including RADIUS server setup.
General| Category | Network Management Software |
|---|---|
| User Interface | Web-based GUI |
| Compatibility | GarrettCom Magnum Switches |
| Features | configuration management |
| Protocols Supported | SNMP |
| Operating System Compatibility | Windows |
To Next Page