AIR CONDITIONER FEATURES(CONTINUED)
TO TURN UNIT ON:
NOTE: The following instructions represent the Unit Controls, the same instructions can be used
for the Remote Control.
TO CHANGE TEMPERATURE
SETTING:
Press the On/Off button.
Press to raise
Press to lower
( <) or Right (>) button
until the
desired temperature is seen on the
If you want the display
to read the
actual room temperature, see
To
Operate on
Fan Only section.
NOTE:
TO ADJUST FAN SPEED
Press to select
appropriate fan
speed
6
NOTE:
Auto,
Low, Med or High. Each time the
button
is pressed,
the fan speed mode is shifted.
is
Low
automatically.
display.
It is
actually 86 F.
#
Press or hold either Left
#
set to
On Dry mode,
the
fan
speed
Mode Mode
Auto
Auto
Mode Mode
Auto
Auto
Use to select the Fan Speed in four steps-
O
To Next Page
Loading...
