AIR CONDITIONER FEATURES
Before you begin, thoroughly familiarize yourself with the control panel and remote controller
and all its functions, then follow the symbol for the functions you desire.
The unit can be controlled by the unit control panel alone or with the remote controller .
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
OPERATION PANEL OF THE AIR CONDITIONER
Selects the appropriate operating mode.
Each time you press the button, a mode
is selected in a sequence that goes from
AUTO, COOL, DRY, FAN
light illuminates under the different mode
setting.
NOTE: The control is capable of displaying
temperature in degrees Fahrenheit or degrees
Celsius. To convert from one to the other, press
and hold the Up and Down buttons at the same
time, for 3 seconds.
and AUTO OFF stop time program, in
3
the TIMER setting in a range of 0~24hrs.
2
SLEEP button
1
MODE select button
4
ON-OFF button
6
FAN button
TIMER button
5
7
O
or
F and the Auto-timer settings.
While on DRY and FAN modes, it shows
the room temperature.
O
LED Display
6
NOTE: This manual does not include Remote Controller see the <<Remote
"Instructions"
Controller Instructions >> packed with the unit for details.
1
33
2
4 56
7
Fig.3
.The mode indicator
Use this button to initiate the SLEEP operation.
UP ( ) and DOWN ( ) buttons
Use these buttons to adjust (increasing/decreasing)
temperature settings (1 C/2 F increments)
in a range of 17 C (62 F) to 30 C (88 F) or
- Shows the set temperature in C
Press to select the fan speed in two steps -
light illuminates under different fan settings.
LOW and HIGH. The fan speed indicator
conjunction with the & buttons.
Use this button to initiate the AUTO ON start time
Use this button to switch the unit on and off.
To Next Page
Loading...
