G F M 4 0 0 S E R I E S U S E R M A N U A L
Appendix
D
Schiltknect Vane
Anemometer
NOTE:
Schiltknecht anemometers do not form part of the ATEX certification of the
GFM series. Contact Gas Data for further advice on the safe use of
these probes.
Operating Instructions
These operating instructions are intended to ensure that the Schiltknecht measuring
instrument and probe remain perfectly serviceable, guaranteeing fault-free and safe
operation. We therefore ask you to read these instructions carefully beforeplacing
the Instrument in operation for the first time.
Immediately after unpacking the instrument, please check for any mechanical
damage. Any damage detected should be immediately reported to the relevant post
office or to the carrier at your company's location.
Avoid moisture, extreme temperatures and vibrations.
Do not shake!
Cleaning of probes and indication unit only according cleaning instruction!
Strong electromagnetic interference (e.g. transformers, radio transmitting
equipment) may affect the accuracy of the measuring instrument.
Important notes
Every Schiltknecht instrument has a designed operating range. The transducers
have been developed and produced for this envisaged operating range. The
calibration corresponds to the actual state at the moment measurements are made.
It is influenced by incorrect handling and in the course of the period of use.
GFM400 Series 29 GFM400 Series User Manual
To Next Page
Loading...
Need help?
General
