Need help?Do you have a question about the GAS GAS MC65 - 2006 and is the answer not in the manual?
General| Engine Type | Single cylinder, 2-stroke |
|---|---|
| Transmission | 6-speed |
| Seat Height | 750 mm |
| Fuel Tank Capacity | 3.5 l |
| Front Suspension | Marzocchi USD Ø35 mm |
| Rear Suspension | Mono shock |
| Front Brake | Disc, Ø190 mm |
| Rear Brake | Disc, Ø150 mm |
| Ignition | CDI |
| Starting System | Kickstart |
| Final Drive | Chain |
| Front Tire | 60/100-14 |
| Rear Tire | 80/100-12 |
| Cooling | Liquid cooled |
| Frame | Steel |
Essential steps for breaking in the engine to ensure optimal performance and longevity.
Essential checks to perform before starting the motorcycle to ensure safety and proper function.
Guidance on how to set off and begin riding the motorcycle safely.
Instructions on how to change gears and operate the motorcycle while driving.
Operation of the fuel tap, starting procedures (cold/warm/flooded), and fuel/oil mixture.
Checking, topping up, and changing transmission oil; cooling system checks.
Adjusting throttle cable and idle speed; inspecting spark plug.
Checking brake fluid, adjusting brake lever, bleeding brakes, and front fork oil levels.
Lubricating levers, foot pegs, kick-start pedal, throttle control, and chain.
Recommended methods for cleaning the motorcycle safely and effectively.
Procedures for properly storing the motorcycle for extended periods.
Steps to follow to start the motorcycle after it has been stored.
Detailed technical specifications for the MC 65 motorcycle engine.
Detailed technical specifications for the MC 65 motorcycle frame and chassis.
A chart outlining recommended maintenance tasks and their service intervals.
A guide to identify and resolve common faults and engine problems.
Details on the warranty coverage provided by the manufacturer for new motorcycles.
Requirements for the purchaser to maintain warranty validity, including inspections.
List of parts and conditions not covered by the manufacturer's warranty.
Additional terms regarding repair decisions, part replacement, and resale.
To Next Page