Need help?Do you have a question about the GAS GAS TXT PRO - PART LIST 2005 and is the answer not in the manual?
General| Brand | GAS GAS |
|---|---|
| Model | TXT PRO - PART LIST 2005 |
| Category | Motorcycle |
| Language | English |
Pair of handlebar grips for the trial bike.
Components for the throttle twist grip.
Complete handlebar unit and related parts.
Parts list for the front fork suspension system.
Components related to the steering axle and clamps.
List of components for the front wheel, including axle and brake.
Components of the front brake caliper and disc.
Fenders, radiator covers, and exhaust protectors.
Components for the headlight and associated sets.
Decals for the swingarm and fuel tank.
Stickers for the seat base and frame.
Complete sticker sets for different models.
Parts related to the fuel tank, including cap and fittings.
Parts for the radiator, including hoses and grill.
Components for the steering head and the main frame.
Footpegs and engine/chassis protection components.
Parts for the swingarm, including axle and bushings.
Components for attaching the shock absorber to the swingarm.
The exhaust pipe and its related gaskets and fasteners.
The silencer unit and its components.
List of components for the rear wheel, including rim and spokes.
Components for the rear brake disc and sprocket.
Parts for the air filter and its box.
The main air cleaner box and related fasteners.
Bulbs, indicators, and headlight/taillight parts.
Components related to the ignition system and CDI unit.
Light switch, indicator supports, and CDI support.
Parts for the kickstart pedal mechanism.
Reeds, clamp, and reed block assembly.
Components of the gear selector mechanism.
Parts for the shift shaft, including forks and springs.
Left and right crankcase halves and related gaskets.
Seals for the crankshaft and clutch hose.
Parts for the crankshaft assembly for 125/200cc models.
Parts for the crankshaft assembly for 250/280/300cc models.
Friction and steel clutch discs, pressure plate.
Clutch springs, hub, and transmission gears.
Cylinder head, piston, rings, and clips.
Cylinder base, studs, and various gaskets.
Various gears, shafts, and circlips for the gearbox.
Carburetor cover, slide, needle jet, and springs.
Jets, floats, and other internal components.
Gasket kits and the complete carburetor assembly.
Turbine, seals, O-rings, and axle for the water pump.
Water pump cover, circlip, and pump to cylinder hose.
To Next Page