Gasboy 1800 Series - User Manual

SERIES 70 AND 1800
CONSUMER ELECTRIC PUMPS
INSTALLATION/OPERATION/PARTS
MANUAL
035219
REV. 0259
INSTALLERS - IMPORTANT
In addition to installation information, this manual contains warnings, safeguards
and procedures on the use and care of the Series 70 and 1800 pumps. Please leave
this manual with the pump owner after the installation is complete.
Copyright 1999 by Gasboy International, Inc. All rights reserved.
The information in this document is confidential and proprietary. No further disclosure shall be made without
permission from Gasboy International, Inc. Gasboy International, Inc. believes that the information in this document
is accurate and reliable. However, we assume no responsibility for its use, nor for any infringements of patents or
other rights of third parties resulting from its use. We reserve the right to make changes at any time without notice.
GASBOY INTERNATIONAL, INC. A TOKHEIM SUBSIDIARY LANSDALE, PA

Summary

Important Warnings and Safeguards

Introduction and Specifications

Purpose of the Manual

Outlines the manual's objective and target audience for pump installation and operation.

Pump Specifications Overview

Details the technical features, motor, register, and connections for Series 70/1820 pumps.

Installation Guidelines

Installation Precautions and Best Practices

Essential DOs and DON'Ts for safe and compliant pump installation.

Mounting and Piping Configurations

Covers underground supply lines, direct mounts, pedestal, and wall mounting.

Vacuum Breaker Installation

Explains the function and installation procedure for the vacuum breaker system.

Electrical Wiring and Safety

Wiring Precautions and Component Requirements

Guidelines for safe wiring, circuit breakers, grounding, and wire sizing.

Wiring Diagrams and Pulser Connections

Electrical diagrams for different pump configurations and pulser wiring.

Startup and Daily Operation

Pre-Startup Checklist and Procedure

Steps to verify installation and perform the initial pump startup.

Post-Startup Tests and Meter Calibration

Performing voltage checks, tightness tests, and meter calibration.

Daily Operation and Strainer Cleaning

Procedures for everyday use and routine strainer maintenance.

Maintenance and Troubleshooting

Routine Maintenance Procedures

Tips for maintaining pump performance, finish, and components.

Troubleshooting Common Pump Issues

Diagnosing and resolving problems like no start, no prime, or slow delivery.

Disassembly and Service of Registers

Guides for disassembling and servicing pump and register assemblies.

Parts Listings and Diagrams

Series 70 and 1820 Assembly Parts

Illustrated parts breakdown for Series 70 and 1820 pump assemblies.

Motor, Meter-Register, and Gear Parts

Parts lists for direct drive motors, meter-registers, and change gears.

Optional Kits and Accessories

Lists optional kits for upgrades and accessories for the pumps.

Warranty Information

Gasboy 1800 Series Specifications

General

Brand	Gasboy
Model	1800 Series
Category	Water Pump
Language	English