To Next PageTo Next Page
Need help?Do you have a question about the Gasboy SERIES 9800Q and is the answer not in the manual?
Describes the CPU PCB, its functions, and components.
Contains the quantity display for the user and its interface.
Allows RS-485 communication with noise protection and diagnostic LEDs.
Sends pulser signals to external equipment and has diagnostic LEDs.
Provides DC voltages, power failure warning, and battery backup.
Addresses issues where the unit is dead, displays are blank, or activation fails.
Troubleshoots activation failures in standalone mode when pump handle is thrown.
Troubleshoots activation failures in on-line mode when pump handle is thrown.
Solves communication issues between the 9800Q and the GASBOY CFN system.
Addresses issues where the unit resets but fails to dispense fuel from the pump.
Addresses issues where the unit resets but fails to dispense fuel from the dispenser.
Troubleshoots problems related to leak detectors and tripped shear valves.
Solves issues where product is dispensed but quantity is not shown on the display.
Addresses discrepancies in quantity recorded by fuel management systems.
Step-by-step guide for replacing the platform assembly.
Instructions for removing and installing the CPU PCB.
Instructions for replacing the LCD Display PCB.
Instructions for replacing the Power Supply PCB.
Instructions for replacing the RS-485 or Pump Interface PCB.
General| Brand | Gasboy |
|---|---|
| Model | SERIES 9800Q |
| Category | Water Pump |
| Language | English |
