Cleaning And Maintenance
Stainless steel surfaces
Do not use a steel wool pad; it will scratch the surface.
To clean the stainless steel surface, use warm sudsy water or a stainless steel
cleaner or polish. Always wipe the surface in the direction of the grain. Follow
the cleaner instructions for cleaning the stainless steel surface.
Cleaning Knobs
For easier cleaning, the control knobs may be removed by pulling them directly
upwards once the knobs are in the OFF position. The knobs can be washed by
hand with soap and water or in a dishwasher.
To replace knobs after cleaning, align the hole on the knob backside with the gas
valve shaft and push downward until the knob is securely fastened. All knobs are
interchangeable.
Removal of surface burners for cleaning
Turn all controls OFF. Allow cooktop to cool before removing grates and burner
parts. When removing the burner caps and heads, remember their size and
location. Replace them in the same location after cleaning.
Pull the knob straight up off the stem.
Fig.29
Burner cap
Burner cap
Burner crown
Ignition electrode
Thermocouple
Locator pins
Pin indentations
Ignition
electrode
Thermocouple
Fig.30
1721
www.gaslandchef.com
3330-A Marathon Ct Charleston, SC 29418
support@gaslandchef.com
1 (844) 538-7890
To Next Page
Loading...
