www.gaslandchef.com
3330-A Marathon Ct Charleston, SC 29418
support@gaslandchef.com
1 (844) 538-7890
13
8
12
9
Hardware Used: 3x Studs
3x Wing Nuts
Hardware Used: 4x Screws
7. Attach the bolts onto the damper (4),
and put 3pcs washer onto the bolts,
then put the reflector (8) onto the
bolts, put 3pcs washer through the
bolts and fix with screws.
8. Attach the protection guards (9) to
the upper frame by inserting the
hooks at the top of the guards into
the holes on the supports. Repeat at
the bottom of the supports.
Secure the protection guards to the
top of the supports with the fixing
brackets(12) and screw in place.
To Next Page
Loading...