Need help?Do you have a question about the Gasmet GT5000 and is the answer not in the manual?
General| Type | FTIR gas analyzer |
|---|---|
| Measurement Principle | Fourier Transform Infrared Spectroscopy (FTIR) |
| Spectral Range | 900 - 4200 cm-1 |
| Gas Components | Multiple gases simultaneously |
| Measured Gases | VOCs, greenhouse gases |
| Detection Limit | ppb level |
| Response Time | Less than 1 second |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Gas Cell Path Length | 5 m |
| Resolution | 8 cm-1 |
| Measurement Interval | typically 1 second |
Explains various symbols used in the manual.
Procedure to inspect the analyzer upon delivery.
Guidelines for safely moving and transporting the analyzer.
Recommendations for storing and packaging the analyzer.
Key safety guidelines for analyzer installation.
Basic instructions for operating the associated tablet.
Steps for installing and configuring the Calcmet software.
Detailed steps for configuring the Calcmet software.
How to connect gas sample lines to the analyzer.
Procedures for analyzer startup and connecting to devices.
Key Calcmet settings and measurement configurations.
Checking hardware status and performing interferometer purge.
Instructions for background, sample measurements, and result analysis.
Guidelines to prevent damage to the analyzer.
Routine maintenance tasks and schedule.
Details about the analyzer's enclosure.
Information on battery and AC/DC power.
Description of front panel features and controls.
To Next Page
